How to Mix Burnt Orange: Paint, RGB & CMYK Formulas Explained

To mix Burnt Orange paint, start with a vivid orange, work in Burnt Sienna for earthy red-brown depth, and mute the mixture with a very small touch of Ultramarine Blue if necessary. The result should be warmer and more orange than a typical brown, but quieter and deeper than a brilliant orange straight from the tube. The exact balance depends on the pigments, opacity and medium you use.

This guide follows three distinct recipes in the illustration: Classic Burnt Orange, Redder Burnt Orange and Earthier Burnt Orange. It also explains five adjustments, pigment codes, beginner-friendly alternatives, medium-specific techniques, practical paint matching and realistic uses. Whether you are painting autumn foliage, ceramics, brick, textiles or a warm landscape, the aim is a repeatable mixture rather than a single universal colour formula.

How to Mix Burnt Orange Paint three-column infographic with Classic, Redder and Earthier Burnt Orange recipes and labelled pigment swatches
Three starting approaches to Burnt Orange. Use the illustrated ratios as test mixes and adjust based on the actual pigments and dried swatch.

Quick answer: how to mix Burnt Orange

For Classic Burnt Orange, mix 3 parts Cadmium Orange (PO20), 1 part Burnt Sienna (often PBr7) and a tiny touch of Ultramarine Blue (PB29). For Redder Burnt Orange, use 2 parts Cadmium Red Light (PR108), 2 parts Cadmium Orange (PO20) and 1 part Burnt Sienna. For Earthier Burnt Orange, start with 3 parts Cadmium Orange, 1 part Burnt Umber (commonly PBr7) and a small amount of Yellow Ochre (often PY42). These are the proportions shown in the Mix illustration, and they should be treated as starting points rather than fixed colour standards.

You do not need cadmium paint to achieve this colour. Artists can use cadmium-free orange and red alternatives with comparable hue and opacity, then fine-tune them with earth pigments. Because modern substitutes vary markedly in tinting strength, start with small batches and compare dry swatches. The full guide below includes a practical from-primaries route.

On this page

  1. What colour is Burnt Orange?
  2. Pigments and supplies for mixing Burnt Orange
  3. Cadmium pigments, alternatives and safe studio handling
  4. Three practical Burnt Orange paint recipes
  5. How to use ratios and build a reliable test mix
  6. Five ways to adjust Burnt Orange paint
  7. How to mix Burnt Orange without ready-made orange
  8. Burnt Orange versus Rust, Terracotta and related colours
  9. Mixing Burnt Orange in acrylic, oil, watercolour and gouache
  10. Painting believable Burnt Orange surfaces
  11. Matching a specific Burnt Orange reference
  12. Troubleshooting common Burnt Orange problems
  13. Common mistakes that weaken a Burnt Orange mix
  14. Burnt Orange HEX, RGB and CMYK
  15. Where Burnt Orange works: painting, design and colour combinations
  16. Frequently asked questions
  17. Explore Burnt Orange in The Color Atlas

What colour is Burnt Orange?

Burnt Orange is a muted, moderately deep orange with noticeable red-brown or earthy character. It sits between a bright orange and a warm rust-like brown, but its identity depends on retaining enough orange chroma that it does not simply become brown. It is associated with autumn leaves, fired clay, brickwork, sun-baked landscapes and warm vintage palettes. A slightly redder version feels richer and more energetic; a yellower or earthier version can look sunlit, dusty or natural.

There is no single universally agreed pigment mixture or digital code for Burnt Orange. A colour labelled Burnt Orange by a paint manufacturer may be darker, browner, redder or more yellow than a web palette sample. The appearance also changes with finish: the same hue can feel vibrant on a glossy surface and softer on a matte, porous ground. A high-quality mixing guide therefore explains both the direction of the colour and how to match a particular sample.

A vivid orange is usually made more burnt by adding a darker, earthier component rather than simply adding black. Earth pigments create warmth and depth in different ways: Burnt Sienna often pushes orange toward red-brown, while Burnt Umber generally darkens and neutralises. A trace of blue, its near-complement, can mute orange quickly; use a very small amount and judge the dried result.

Pigments and supplies for mixing Burnt Orange

Cadmium Orange (PO20) supplies a strong warm orange base in the illustrated recipes. Cadmium Red Light (PR108) can intensify the red side of Burnt Orange. Burnt Sienna is often labelled PBr7, although pigments sold under that paint name vary by brand. Burnt Umber is commonly PBr7; its darker earthy character helps produce a restrained variant. Ultramarine Blue (PB29) is a powerful temperature and saturation adjustment; Yellow Ochre commonly uses PY42 or PY43 and gives the earthier recipe a golden base.

  • Orange: Cadmium Orange PO20 or a cadmium-free equivalent in a similar hue.
  • Red: Cadmium Red Light PR108 or a comparable warm red substitute.
  • Earth pigments: Burnt Sienna, Burnt Umber and Yellow Ochre; check the tube for its actual pigment code.
  • Blue: Ultramarine Blue PB29 for tiny neutralising adjustments.
  • Optional: Titanium White PW6 to create opaque lighter tints; yellow and a warm red if you want to build orange from scratch.
  • Tools: clean palette knife, white mixing surface, scrap paper or primed sample board, labelled test swatches and consistent measurement portions.

Pigment codes matter because paint names are not identical formulations. Two tubes labelled Burnt Sienna may have different opacity, staining behaviour and tinting strength. Cadmium colours are also sold in hues and cadmium-free formulations: those alternatives may look similar when used alone but behave differently in mixtures. For everyday studio practice, choose materials compatible with your medium and follow the manufacturer’s handling instructions; avoid inhaling dry pigment dust and never assume every substitute mixes identically.

Cadmium pigments, alternatives and safe studio handling

The recipe diagram names Cadmium Orange (PO20) and Cadmium Red Light (PR108) because these are familiar traditional artist’s colours with strong, warm hues. They are not required to make Burnt Orange. A modern cadmium-free orange or cadmium-free warm red can be a suitable starting point, particularly for artists using children’s materials, classroom paints or brands that do not offer cadmium colours. A substitute’s pigment composition, opacity and mixing strength may differ, so an exact copy of the illustrated parts is not guaranteed to give the same colour.

For a cadmium-free version, select an orange of similar hue, add Burnt Sienna gradually and compare the dry result. For a redder version, add a small quantity of a warm, cadmium-free red to the orange before introducing the earth colour. For the earthier version, combine your orange with Burnt Umber and only enough Yellow Ochre to return a golden warmth. This preserves the logic of all three recipes without depending on a particular hazardous pigment class.

Always follow the label and safety instructions for the products you actually use, especially when spraying paint, sanding a dried layer or handling powdered pigments. Avoid inhaling dust or mist, keep paint and brushes away from food areas and use appropriate ventilation and protective equipment for the process. Paint toxicity depends on its specific formulation and exposure route; a colour name alone cannot establish that a product is safe or unsafe.

Three practical Burnt Orange paint recipes

1. Classic Burnt Orange — balanced and earthy

  1. Put 3 parts Cadmium Orange (PO20), or a similar cadmium-free orange, on a clean palette.
  2. Mix in 1 part Burnt Sienna (often PBr7) until the orange develops a warm red-brown depth.
  3. Add only a tiny touch of Ultramarine Blue (PB29) to lower saturation without making the mix look dull or grey.
  4. Draw out a thin and thick sample stroke, label the ingredients and leave the paint to dry.
  5. If the result is too brown, return to a little orange; if too bright, use a still smaller blue increment.

The Classic recipe should produce a visibly orange, grounded shade. Blue is not the main ingredient: it is a correction pigment. Because some oranges and siennas are already muted, this step may be unnecessary. Do not add the full blue touch before first seeing how the orange-and-sienna mixture behaves.

2. Redder Burnt Orange — a stronger red undertone

  1. Measure 2 parts Cadmium Red Light (PR108) and 2 parts Cadmium Orange (PO20).
  2. Combine these first to make a coherent warm red-orange.
  3. Mix in 1 part Burnt Sienna (often PBr7) to create earthy depth.
  4. Compare against Classic Burnt Orange: the redder mix should read as richer, not as a red-brown maroon.
  5. If the colour is too red, add a small additional amount of orange; if too bright, adjust the earth component gradually.

A redder mix works particularly well for sunset light, autumn accents and fired-clay colour shifts. The actual colour may vary because a strong red can dominate a nominally equal-volume orange mixture. With non-cadmium replacements, begin by adding the red to the orange gradually rather than assuming the original ratios transfer perfectly.

3. Earthier Burnt Orange — deeper and more natural

  1. Begin with 3 parts Cadmium Orange (PO20) or a close substitute.
  2. Blend in 1 part Burnt Umber (often PBr7) for a deeper, softer earthy tone.
  3. Introduce a small amount of Yellow Ochre (often PY42) to bring back a warm golden component.
  4. Mix until uniform and make a dry comparison sample next to the Classic and Redder versions.
  5. If the result loses its orange character, correct with orange instead of additional yellow or white.

This version can evoke weathered orange plaster, pottery, dry soil or autumnal textiles. Burnt Umber is normally darker and more neutralising than Burnt Sienna, so it can overpower an orange quickly. The yellow ochre gives warmth but may not restore saturation if too much umber has already been added.

How to use ratios and build a reliable test mix

Use the term part consistently: one part can mean one equal palette-knife scoop, drop or measured portion, but it does not represent a fixed pigment concentration. Ratios are only useful when the same paint line, measurement method and surface are held constant. If you switch brands or paint types, retest before making a large batch.

A reliable studio method is to mix three small reference swatches at the illustrated proportions, make each one slightly lighter and darker, then let them dry completely. Record the precise pigment names and codes, not just “red” and “orange.” In a fourth swatch, omit the neutralising blue to see whether it genuinely improves the Classic mixture. This helps distinguish an appealing burnt-orange hue from an over-neutralised brown.

Compare value, hue and chroma separately. Hue describes whether the result leans red, yellow or orange; value describes lightness or darkness; chroma describes vividness. Adding Burnt Umber may change all three. White generally lightens but can make a rich orange appear peachy or chalky. A trace of blue often reduces chroma and may lower value as well.

Five ways to adjust Burnt Orange paint

Begin with a prepared Burnt Orange base. The Adjust illustration uses 3 parts Burnt Orange as the reference amount for each variation. The small pigment additions should be tested in separate portions so you can compare the effect of each adjustment. The goal is not to use every adjustment at once.

How to Adjust Burnt Orange Paint infographic: Lighter with white, Warmer with cadmium orange, Cooler with ultramarine, Deeper with burnt umber and Muted with neutral grey
Five illustrated ways to adjust Burnt Orange. Apply changes in small increments and compare the dried paint.

1. Lighter Burnt Orange

The illustration combines 3 parts Burnt Orange and 2–4 parts Titanium White (PW6). This makes a significantly lighter, softer tint. In practical painting, begin with less than the upper amount of white if you only need a small adjustment. Too much white turns the colour toward peach, salmon or pale terracotta; that can be desirable for a tint, but it is not the same as a naturally light, saturated Burnt Orange.

2. Warmer Burnt Orange

To 3 parts Burnt Orange, add a very small amount of Cadmium Orange (PO20), or a suitable alternative. This pushes the hue toward a brighter, warmer orange. The visual result may be more vivid rather than simply “warmer,” so compare it against the original swatch. To create a golden warmth instead, a controlled touch of Yellow Ochre or yellow may be more appropriate for some target references.

3. Cooler Burnt Orange

Mix 3 parts Burnt Orange with a very small touch of Ultramarine Blue (PB29). The blue usually quiets the orange and shifts it toward a more neutral, deeper red-brown rather than producing a visibly cool blue-orange. That distinction is important: colour temperature is relative, and a muted orange can still feel warm next to true neutrals. Stop before the mix becomes muddy.

4. Deeper Burnt Orange

Add a small amount of Burnt Umber (often PBr7) to 3 parts Burnt Orange. The shade gains depth and earthy richness while usually losing some saturation. For a redder darkening, consider testing a little Burnt Sienna instead. A dark version should still register as Burnt Orange when seen in adequate light, rather than becoming generic dark brown.

5. Muted Burnt Orange

Blend a very small amount of Neutral Grey into 3 parts Burnt Orange. The figure labels a possible PBk7/PW6 neutral-grey combination; check the actual tube before relying on those codes. The addition softens vividness and may alter value. Because blue or earth pigments can also neutralise orange, compare options before choosing the one that gives the cleanest result.

How to mix Burnt Orange without ready-made orange

A ready-made orange is convenient, but it is not required. To create Burnt Orange using more basic colours, begin with a warm yellow and a warm red to mix orange. Many artists find a warm red such as Pyrrole Red or Cadmium Red Hue, combined with a yellow such as a warm Hansa Yellow, gives a controllable orange foundation. The exact balance depends strongly on the pigments, so there is no universal “two drops yellow to one drop red” formula.

Once the orange reads cleanly, introduce Burnt Sienna or a warm reddish brown little by little. If these are unavailable, make a small orange-brown with the same red and yellow, then neutralise a portion with the slightest touch of blue. Avoid using all three primaries in large proportions at once, as a mixture can become flat and dark before it reaches a recognisable burnt-orange hue.

A common practical question is whether Burnt Sienna on its own is “already Burnt Orange.” It may be close, particularly in opaque paint, but many siennas are redder and browner than the intended orange. Mixing a little warm orange into Burnt Sienna often gives greater control than trying to brighten a dark earth pigment with white.

Burnt Orange versus Rust, Terracotta and related colours

Burnt Orange versus Rust: both combine orange, red and earth tones. Rust often suggests oxidised iron and may lean browner, redder or rougher, whereas Burnt Orange can remain more saturated and decorative. They overlap, which is why their guides should emphasise different references, textures and corrections rather than offer identical recipes.

Burnt Orange versus Terracotta: Terracotta is frequently softer, more clay-like and muted, often incorporating red, beige or earthy pink influences. Burnt Orange can appear more energetic and obviously orange. A pale, opaque Burnt Orange tint may approach terracotta; compare two dry painted samples before assigning a name.

Burnt Orange versus Burnt Sienna: Burnt Sienna is both a recognised earth-pigment paint name and a colour family. Burnt Orange is mainly a descriptive hue name. A real Burnt Sienna tube may produce an excellent ingredient for Burnt Orange, but it is not necessarily an exact match by itself.

Burnt Orange versus Peach or Coral: Peach is typically lighter and softer; Coral commonly has stronger pink or red influences. Both may result from lightening or redirecting warm orange mixes, but their target effects and proportions differ significantly.

For adjacent references, explore How to Mix Orange, How to Mix Terracotta, How to Mix Peach and How to Make Rust.

Mixing Burnt Orange in acrylic, oil, watercolour and gouache

Acrylic paint

Acrylic colours dry relatively fast, making small labelled swatches especially useful. Mix with a palette knife to distribute earth pigments evenly, then test on primed canvas, paper or the actual project substrate. Some acrylic mixtures appear slightly darker or less glossy after drying. Keep the medium consistent between tests, particularly when comparing matte acrylics with heavy-body or fluid formulations.

Oil paint

Oil paint offers more working time for adjusting a warm-to-cool series. You can lay a rich Burnt Orange mixture beside Burnt Sienna and blend transitions directly on the surface. Be mindful that adding medium changes transparency and film handling; keep the ratio of pigment to medium appropriate for the painting process and follow sound layering practices. Gloss and lighting can make the wet mixture look more saturated than the dry result.

Watercolour

In watercolour, preserve light with water dilution and the white of the paper, not automatically with Titanium White. A transparent warm red and yellow can create a luminous orange; a tiny addition of an earth colour produces a muted burnt note. Ultramarine may granulate differently from the warmer pigments, which can enrich stone, leaf or rust textures but complicate an even flat wash. Test on the paper you intend to use.

Gouache

Gouache is usually more opaque and may contain lightening agents or fillers. Use small amounts of white to build pale versions, but remember that strong lightening may make the mixture creamy rather than authentically earthy. Dried gouache often shifts in perceived value. Paint a full-strength swatch and a diluted or lightened swatch, and compare them only when dry.

Painting believable Burnt Orange surfaces

Burnt Orange is especially effective in subject matter where the surface has both warm colour and visual variation. For autumn leaves, mix a central Burnt Orange and vary it with brighter yellow-orange highlights and red-brown or violet-grey shadows. For brick, use restrained local colour with uneven edges, darker mortar and small warm-cool shifts; brick is not one perfectly even orange rectangle.

For ceramics and fired clay, separate the base hue from surface sheen. Matte clay can look softer and earthier, while glazed pottery needs reflected highlights and darker, often sharper value shapes. For sunset-lit buildings, mix a warm light-facing surface and compare it with less saturated shadow planes. The contrast makes the orange appear luminous without requiring excessive saturation everywhere.

When working from a photograph, remember that the camera may exaggerate red and orange in strong warm light. Instead of copying a single sampled point, observe the range from the deepest shadow through the typical midtone to the highlight. A good Burnt Orange mix is a foundation for painting that range, not a replacement for value structure.

Matching a specific Burnt Orange reference

Choose the exact surface or digital reference you want to reproduce, and make a series of dry swatches under the same lighting. Identify the target’s approximate value first: a dark rusty accent needs a different amount of brown than a bright autumn orange. Next, determine whether it is redder or yellower. Finally, judge whether it should be vivid, earthy or greyed down.

Make three neighbouring mixtures: one more orange, one more red and one more neutral. Place them beside the target rather than holding them up one at a time. If the colour is destined for a wall, object or artwork, test it on the actual material, because absorbency, primer, finish and lighting can change its appearance. Wet paint is not a dependable final comparator.

For repeatability, record the manufacturer and product line, pigment codes, mixing amounts, medium, ground and drying time. If you need the colour at production scale, ask for a manufacturer colour match or measured physical standard rather than translating a HEX value directly into a paint recipe.

Troubleshooting common Burnt Orange problems

  • Too bright or fluorescent: Add a tiny earth pigment or a carefully controlled touch of blue; stop before it becomes flat.
  • Too brown: Restore more warm orange and compare value separately; do not automatically add white.
  • Too red: Add yellow-leaning orange or a modest amount of warm yellow.
  • Too yellow: Introduce a small amount of warm red or Burnt Sienna.
  • Too dark: Mix a fresh light version and blend the two; white alone may produce a peachy tint.
  • Too muddy: Retest the orange foundation without the neutraliser; use fewer pigments and smaller additions.
  • Different after drying: Compare dried test swatches on the intended surface under the actual light.

If the finished mixture no longer looks orange, do not keep adding unrelated pigments in the hope of rescuing the entire batch. Put a little aside, rebuild a clean orange, and gradually work the problematic paint back into that new base. This gives a more predictable result than repeated alternating corrections with blue, white, red and yellow.

Common mistakes that weaken a Burnt Orange mix

One common mistake is assuming that “burnt” simply means adding black. Black can darken a bright orange, but it often produces a dull brown before the desired earthy richness appears. Burnt Sienna, Burnt Umber and complementary blue offer different ways of creating depth. Choose based on the target, not a universal shortcut.

Another mistake is treating every pigment of the same colour name as interchangeable. A cadmium-free orange, a transparent organic orange and a highly opaque cadmium orange can create different results with the same measured amount of sienna. Some pigments are staining, others granulating or more opaque. The best way to achieve consistency is to work from actual pigment information, keep your media compatible and preserve labelled dry reference swatches.

A final mistake is confusing Burnt Orange with Burnt Sienna, Rust or Terracotta in every context. These terms overlap visually but can represent different goals. Use the guide that matches the visual target and painting problem rather than the one with the closest sounding name.

Burnt Orange HEX, RGB and CMYK

Burnt Orange does not have a unique, mandatory HEX code. For illustration, #CC5500 is a commonly used web-style Burnt Orange reference: RGB (204, 85, 0). This example is noticeably saturated and red-orange, whereas a muted artist’s Burnt Orange mixture may be browner or darker. A different sampled colour does not necessarily mean the paint was mixed incorrectly.

For that example, the basic, device-independent mathematical approximation from RGB gives CMYK (0%, 58%, 100%, 20%). This is not a press-ready conversion: actual printed CMYK depends on the output profile, paper and inks. Likewise, a colour’s HEX code describes emitted screen colour, not how to combine physical pigments. Reflective paint is affected by material, layer thickness, finish and illumination.

For a digital palette, use the HEX sample as a starting point and check contrast in the real interface or printed proof. For physical painting and colour matching, rely on your dry swatch. A colour may be identical by nominal RGB values yet appear different beside a deep blue, warm cream or near-black background because visual context affects perception.

Where Burnt Orange works: painting, design and colour combinations

Burnt Orange is particularly useful when you want warmth with more restraint than a bright orange. In landscapes it complements deep blue shadows, olive green foliage and earth-coloured terrain. In interiors it works as a ceramic, upholstery or accent colour, often balanced with off-white, warm beige, charcoal, navy or muted green. In graphic design it can suggest energy, heritage, craftsmanship or a seasonal mood without the immediacy of a vivid orange.

Strong combinations include Burnt Orange with Navy Blue for warm-cool contrast, Burnt Orange with Cream for a softer warm palette, and Burnt Orange with Sage or Olive Green for a natural, earthy relationship. The ideal proportions depend on purpose. In a painting, a small intense accent can be more effective than covering half the canvas with the same highly saturated shade.

For digital interfaces, avoid assuming any specific Burnt Orange shade will automatically offer sufficient text contrast against white or dark blue. Check actual foreground and background colour values with a contrast tool. For paintings, assess edge relationships and value contrast rather than applying screen accessibility formulas to physical brushwork.

Frequently asked questions

What colours make Burnt Orange paint?

Mix a warm orange with Burnt Sienna or another earthy brown, then adjust the saturation with a tiny touch of blue if needed.

What is the easiest Burnt Orange recipe?

Start with three parts orange and one part Burnt Sienna, then compare a dry swatch before adding any neutralising pigment.

How do you mix Burnt Orange without orange paint?

Make orange from warm yellow and warm red, then add small amounts of an earth pigment until the colour gains muted depth.

Can I make Burnt Orange from red and yellow?

Yes. Mix orange first, then adjust with a little Burnt Sienna, brown or a carefully controlled complementary colour.

Does Burnt Orange need black?

No. Earth colours and a very small blue addition can create a deep or muted burnt-orange shade without relying on black.

How do I make Burnt Orange darker?

Add Burnt Umber or another dark earth pigment gradually; keep enough orange in the mixture to preserve its identity.

How do I make Burnt Orange lighter?

With opaque paints, add white gradually; in watercolour, preserve the paper or use dilution.

How do I make Burnt Orange redder?

Introduce a little warm red or use a red-orange foundation, then ground it with Burnt Sienna.

How do I make Burnt Orange more yellow?

Blend in warm yellow or a little Yellow Ochre, then check whether the mix still has enough earthy depth.

What is the difference between Burnt Orange and Rust?

They overlap, but Rust often suggests oxidised, darker red-brown surfaces while Burnt Orange may retain more obvious orange character.

Is Burnt Orange the same as Burnt Sienna?

No. Burnt Sienna is a recognised earth-paint colour and possible ingredient; Burnt Orange is a broader descriptive hue.

Is Burnt Orange the same as Terracotta?

Not necessarily. Terracotta commonly appears more muted or clay-like; Burnt Orange can be richer and more saturated.

Which blue can mute Burnt Orange?

Ultramarine Blue PB29 is a useful option, but test tiny amounts because it can darken and neutralise orange quickly.

What does PB29 mean?

PB29 is the Colour Index pigment designation commonly used for Ultramarine Blue.

What is the pigment code for Burnt Sienna?

Burnt Sienna is often sold with PBr7, but check the actual tube because formulations vary.

Can I use cadmium-free orange?

Yes. A cadmium-free orange of comparable hue can work, but adjust ratios for its own tinting strength and opacity.

Why does my Burnt Orange look muddy?

You may have added too much neutralising blue or dark earth colour. Rebuild a clean orange and introduce the earth pigment gradually.

Does Burnt Orange work in watercolour?

Yes. Transparent red and yellow can provide the orange foundation, while an earth pigment adds restrained warmth.

What is a Burnt Orange HEX code?

There is no single standard. #CC5500 is one widely used reference example, but physical paint mixes can differ.

How can I repeat the same Burnt Orange mixture?

Record paint brands, pigment codes, proportions and medium, and retain a fully dried test swatch on the target surface.

For more context, start with the How to Mix Orange guide and the Color Mixing Guide reference hub. Explore related directions in How to Mix Terracotta, How to Mix Peach, How to Mix Coral and How to Make Rust. Each serves a different target colour or painting problem rather than replacing a Burnt Orange recipe.

The most reliable result comes from a repeatable method: build the orange base, adjust it with an earth pigment, use blue sparingly, and compare dry swatches under consistent lighting. Keep hue, lightness and saturation separate as you work. That is how you can adapt Burnt Orange for an autumn landscape, a realistic ceramic surface or a precise design reference without relying on a single rigid formula.